Product Description
Lifetime warranty on all emergency vehicle and strobe LED lights. Compact surface mount directional LED strobe lighthead for emergency or law enforcement vehicles, public safety warning and hazard lighting for marked or unmarked police cars, ambulances, firetrucks, rescue vehicles, water patrol boats, roadside assistance trucks, wreckers and tractors. 12 × 0.5 Watt High Power LEDs. Internal controller has 18 strobe patterns that can be synchronized between lightheads — flash together or flash alternate. Fully potted circuit board and LED module to resist water and corrosion. Includes black plastic bezel; measures 13.627cm(5.36") x 5.62cm(2.21") x 2.483cm(0.98") with four mounting holes. 10" power wires.
6 Watt Vehicle Strobe
Lighthead
Documentation
Wiring Diagram
Applications
LED Emergency Vehicle Lights
Law Enforcement Vehicle Lighting
LED Warning Lights
LED Hazard Lighting
Features
12 High Power LEDs
120° Beam Angle
IP67 Weatherproof Rating
CE/RoHS Compliant
Specifications
Beam Angle
120 degree
Connector Type
Pigtail
Cross Reference Number
P-STRB
Finish
Black
Water Resistance
Waterproof IP67
Number of LEDs in Unit
12 LEDs
LED Type
High Power
Mount Type
Surface
PC Rating
No
Special Features
Multiple Flash Patterns/Syncing Flash Patterns
Standards And Certifications
CE/RoHS Compliant
Submersible
Yes
Volts
10~30 VDC
Wire Length
10in(25.4cm)
Package Dimensions: 2.72" (7cm) x 2.12" (5cm) x 2.12" (5cm)
Package Weight: 4.90oz (0.14kg)
All specifications are subject to change without notice.
Part NO
CCT / Wavelength
Current Draw @ 12 Volts DC
Price Ea.
P-STRB-R6W
600 nm
186 mA
$31.95
P-STRB-A6W
640 nm
474 mA
$31.95
All specifications are subject to change without notice.
(Click to Enlarge)
Connecting the blue wires will synchronize all lightheads. Touching +VDC to the blue wire will change the flash pattern (all heads must be reset individually on the same pattern first to remain synced together on the same patterns)
Grouping for Simultaneous or Alternating Flash:
All units with White and Red wires connected will flash together (Group 1).
All units with White and Red wires NOT connected will flash together (Group 2).
By grouping the lights as above, either simultaneous (Group in 1 group) or alternating groups can be achieved (Group in 2 groups).
For Flash Patterns: Momentarily apply +VDC to BLUE wire: – once for next pattern.
(Click to Enlarge)
NOTE: This unit may not be factory set at FP#0.
Dimensional Drawings
P-STRB-x6W – 6 Watt Vehicle Strobe Lighthead
(Click to Enlarge)